skip to main text

Switching the Paper Source to Match the Purpose

In this printer, there are two paper sources, a manual feed tray and a top feed.
You can facilitate printing by selecting a paper source setting that matches your media type or purpose.

The procedure for setting paper source is as follows:

  1. Select Quality & Media from the pop-up menu of the Print Dialog

  2. Select the media type

    For Media Type, select the same paper type loaded in the printer.

  3. Select the paper source

    For Paper Source, select the item below that matches your purpose.

    figure:Paper Source of Quality & Media in the Print dialog
    Manual Feed
    Paper is supplied from the manual feed tray in the back.

    Important

    • When Plain Paper, Hagaki (A), Ink Jet Hagaki, or Hagaki is selected from the Media Type menu of the Quality & Media on the pop-up menu in the Print dialog, paper cannot be supplied from the manual feed tray in the back.
    • When 4 x 6, 5 x 7, 7 x 10, A5, JIS B5, L, Postcard, Postcard Double, or Square 5"x5" 13x13cm is selected for Paper Size on the Print Dialog, paper cannot be supplied from the manual feed tray in the back.
    Top Feed
    Paper is fed from the top feed.

    Important

    • When Premium Baryta Photo Paper, Fine Art Smooth, Premium Fine Art Rough, Photo Paper Pro Premium Matte A, Heavyweight Photo Paper, Extra Heavyweight Fine Art Paper, or Highest Density Fine Art Paper is selected from the Media Type menu of the Quality & Media on the pop-up menu in the Print dialog, paper cannot be supplied from the top feed.

  4. Click Print

    When you perform print, the printer uses the specified paper source to print the data.

    Note